Vibe Slick Bass Pack 2.1

A full installation in a box compromising of SLICK A1 amplifier, SLICK SLR enclosure, SLICK 6c9’s and all the cables necessary. The Slick 2.1 Pack is perfect if you are looking for a quick and easy way to greatly improve your car’s audio installation. The SLICK A1 is only available as part of the 2.1 pack.

The Slick Bass Pack 2.1 Includes:

• SLICK SLR12.
• SLICK A1 Amplifier.
• VIBE BASS Wiring Kit.
• SLICK 69.3

• Type: Tri-axial. 
• Configuration: 3-way.
• Speaker Size: 6" x 9".
• RMS Power: 160w.
• Peak Power: 480w.
• Minimum Input: 60w RMS. 
• Sensitivity: 90db.
• Frequency Response: 55 - 25 khz.
• Mounting Depth: 75mm.
• Mounting Diameter: 220 x 150 mm.
• Voice Coil Diameter: 35mm.
• Magnet Material: Ferrite.
• Magnet Weight: 20 Oz.
• Magnet Size: 100 x 18mm.
• Magnet Rating: Y30.
• Recommended Amplifiers: SLICK a2/a3/a4 BlackBox STEREO 2 / 4.

The VIBE 3000watt BASS KIT is specifically designed to gain maximum output from high power BASS systems. Featuring the best BASS specific cables from the VIBE CriticalLinkTM Range.

• FLATLINESTM4AWG PWR Power and Ground cable FLAT Heavy Duty 4 gauge power cable developed to maximised voltage transfer from battery to amplifier - highly flexible easing installation. All cable is terminated with crimped terminal rings. 6m Power. 1m Ground
• FLATBASSTM RCA SolidCoreTM Interconnect Specifically developed for use in BASS SYSTEMS ­ featuring oversized SolidCoreTM OFC signal wire - allowing a heavier voltage to be passed down the cable. 5 metre
• FLATBASSTM 13 SPK Bass speaker cable Specially developed for BASS applications ­ Uses SolidCoresTM that can handle and sustain considerably more power than conventional speaker cable. 3 meters
• FLATLINES TM remote 18 With a current rating of 14 amps this cable can easily handle TURN ON of multiple amplifiers. 5 meters
• VIBE 140 amp circuit breaker The VIBE circuit breaker is rated at a massive 140 amps and offers critical protection to your system ­ if the system over powers or short circuits the breaker will cut in and save your equipment. All cable is terminated with crimped terminal rings in place and accessory fitting kit.

This kit is compatible with the majority of amplifiers on the market ­ VIBE recommends this kit for all VIBE BASS monoblock amplifiers new, current and old models. Model: Bass system Kit ­ Bass specific amplifier wiring kit.